Glexo COLD Glue for hot temperatures 86dg+

Adhesive composition (cold glue) Glexo for high application temperatures, above 86°F /30°C. Uncompromising performance in any job in hot conditions. Under standard temperature conditions, the composition will appear solid, and its adhesive properties will appear in hot weather.

The adhesive composition is intended for use with Glexo power tabs, but it can also be applied separately using special techniques. A feature of the composition is its pronounced non-Newtonian behavior. So with a sharp application of force, the composition becomes much harder, allowing the maximum force from the tool to be transferred to the repaired surface. The remains of the composition are removed from the surface with the bulk on the tab. If it is necessary to separate the adhesive from the surface to be repaired, it is necessary to separate it not with sudden movements.

The adhesive properties of the composition are highly dependent on temperature; therefore, application in cool conditions of this composition will be difficult. Before use, it is important to thoroughly prepare the surface to be repaired by cleaning it from dirt. For deep cleaning of the surface and the best adhesion, the use of Glexo SPS wipes is highly recommended. In case of contamination of the composition, it is allowed to rinse it in water using slightly alkaline detergents.